Data Manager - activating a 2nd IP interface
Last Updated 10 years ago
The PR0486 is a physical component, a USB to Ethernet interface (Eth 1) and is only installed in the Data Manager if it is ordered with one. A PR0496B is in a cardboard box and is fitted by the customer, an activation code is required and you may need to break the Data Manager warranty seal to fit it. If this is the case please contact Technical Support prior to installing the part.
To obtain an activation code please contact Technical Support quoting the purchase order number used to purchase the PR0486B and the “System Key” from the Data Manager on which you wish to enable the PR0486. Note the PR0486 can be enabled FOC on the first Data Manager on which it is installed only.